Design & Reuse
arrow A/D Converter (ADC) (530)
arrow Amplifier (102)
arrow Analog Comparator (21)
arrow Analog Filter (27)
arrow Analog Front Ends (38)
arrow Analog Multiplexer (3)
arrow Analog Subsystems (3)
arrow Clock Synthesizer (83)
arrow Coder/Decoder (CODEC) (107)
arrow D/A Converter (DAC) (222)
arrow DC-DC Converter (67)
arrow DLL (743)
arrow Graphics & Video Modules (5)
arrow Oscillator (342)
arrow Oversampling Modulator (8)
arrow PLL (1723)
arrow Power Management (855)
arrow RF Modules (82)
arrow Sensor (39)
arrow Sensors and Monitors (45)
arrow Switched Cap Filter (1)
arrow Temperature Sensor (143)
arrow Other (497)
855 IP
751
0.0
Combined Power On Reset and Brown Out Reset
Combined Power On Reset and Brown Out Reset...
752
0.0
Combined Power-On-Reset and Brown-Out-Reset in SMIC 40EF
Combined Power-On-Reset and Brown-Out-Reset in SMIC 40EF...
753
0.0
Combined Power-On-Reset and Brown-Out-Reset in TSMC 22ULL
Combined Power-On-Reset and Brown-Out-Reset in TSMC 22ULL...
754
0.0
Combined Power-On-Reset and Brown-Out-Reset in TSMC 22ULL
Combined Power-On-Reset and Brown-Out-Reset with reset signal filtering in TSMC 22ULL...
755
0.0
Combined Power-On-Reset and Low-voltage detection in Samsung Foundries 65nm LFR6LP
Combined Power-On-Reset and Low-voltage detector designed in Samsung Foundries 65nm LFR6LP Bias current reference are provided by capacitor-less low ...
756
0.0
Combined Voltage and Current Reference
The OT0118 is a medium precision, trimmed bandgap voltage reference and temperature compensated current reference generator....
757
0.0
Low Dropout (LDO) Capless Regulator
The ODT-LDO-IC-300M-7 is a low dropout (LDO), linear regulator for integration in a SoC. The LDO uses advanced control techniques to achieve excellent...
758
0.0
Low Dropout (LDO) Capless Regulator 250mA - TSMC 12/16 FFC
1-VIA’s Linear Low-Dropout (LDO) voltage regulator IP is a capless LDO regulator which provides programmable precise voltage regulation across a wide ...
759
0.0
Low Dropout (LDO) Capless Regulator 250mA - TSMC 28 HPC+
1-VIA’s Linear Low-Dropout (LDO) voltage regulator IP is a capless LDO regulator which provides programmable precise voltage regulation across a wide ...
760
0.0
Low Dropout (LDO) Capless Regulator 250mA - TSMC 40
1-VIA’s Linear Low-Dropout (LDO) voltage regulator IP is a capless LDO regulator which provides programmable precise voltage regulation across a wide ...
761
0.0
Low Dropout (LDO) Capless Regulator 250mA - TSMC 7FF
1-VIA’s Linear Low-Dropout (LDO) voltage regulator IP is a capless LDO regulator which provides programmable precise voltage regulation across a wide ...
762
0.0
Low input voltage high performance LDO regulator in TSMC 22ULL
Low input voltage, high performance LDO linear regulator in TSMC 22ULL with programmable output voltage to supply core logic domains, SRAM arrays or R...
763
0.0
Low Noise Voltage Reference
...
764
0.0
Low Noise, High PSRR Replica Voltage Regulator
The WEALDO18NI12SFN32M22G is a voltage regulator operating from 1.8 V. It provides three output voltages 1.2 V driving output load that sinks specific...
765
0.0
Low Noise, High PSRR, Replica LDO
The WEALDORP18NI12RRSP22M22G is a voltage regulator operating from 1.8 V voltage supply. The WEALDO18NI12SFN12M22G provides one output voltage 1.2 V d...
766
0.0
Low Noise, High PSRR, Replica LDO
The WEALDORP1812NI8SFN12M22G is a low-dropout regulator LDO with voltage supplies 1.8 V and 1.2 V. The WEALDORP1812NI8SFN12M22G gives one output volta...
767
0.0
Low Noise, High PSRR, Replica LDO
The WEALDORP1812NI08SFN22M22G is a voltage regulator operating from 1.8 V and 1.2 V power supplies. The WEALDORP1812NI08SFN22M22G provides two 0.8 V...
768
0.0
Low Noise, High PSRR, Replica LDO
The WEALDORP1812NI08SFN42M22G is a voltage regulator operating from 1.8 V and 1.2 V power supplies. The WEALDORP1812NI08SFN42M22G provides four 0.8...
769
0.0
Low Noise, High PSRR, Replica LDO
The WEALDOLR18NI2SFN42M22G is a voltage regulator operating from 1.8 V. It provides four output voltages 1.2 V driving output load that sinks specific...
770
0.0
Low Noise, High PSRR, Replica LDO
The WEALDOLR18NI2SFN42M22G is a voltage regulator operating from 1.8 V. It provides four output voltages 1.2 V driving output load that sinks specific...
771
0.0
Low Power 30mA 10Ghz BW capless IP Core
A 30mA 10GHz BW capless LDO (Low Drop-Out) is a type of voltage regulator that is designed to provide a stable output voltage with a low voltage drop ...
772
0.0
Low Power 5V - > 1.8V Cap-less LDO IP Core
A 5V -> 1.8V low-power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 1.8 volts from a 5-volt input ...
773
0.0
Low Power 5V->2.4V Low noise LDO IP core
A 5V -> 2.4V low power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 2.4 volts from a 5-volt input ...
774
0.0
Low Power 5V->3.0V Cap-less LDO IP Core
A 5V -> 3.3V low power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 3.3 volts from a 5 volt input ...
775
0.0
Low Quiescent DC/DC Buck Converter in TSMC 22ULL
Low-quiescent DC/DC buck converter in TSMC 22ULL supporting an 1.62 V to 3.63 V input voltage range with low quiescent current and high efficiency at ...
776
0.0
Low Quiescent DC/DC Buck Converter in TSMC 22ULL
Low-quiescent DC/DC buck converter in TSMC 22ULL supporting an 1.62 V to 3.63 V input voltage range with low quiescent current and high efficiency at ...
777
0.0
Low-Area DC/DC Buck Converter
Low-area DC/DC buck converter for battery-powered IoT applications....
778
0.0
Low-leakage LDO in TSMC 22ULL supporting up to 3.63 V input voltage
High-performance LDO regulator to supply noise-sensitive active domains from input voltage up to 3.63 V....
779
0.0
Low-leakage LDO in TSMC 22ULL supporting up to 3.63 V input voltage
LDO regulator in TSMC 22ULL to supply logic and sensitive domains from input voltage up to 3.63 V...
780
0.0
Low-Noise Bandgap Reference - Low Noise: 63nV/√Hz, PSRR: -80dB TSMC 0.18μm CMOS (CLM18)
This macro-cell is a low noise, high PSRR voltage reference core designed for TSMC 0.18μm (CLM18) CMOS technology. The core is ideal for applications ...
781
0.0
Low-noise Regulator for VCO 1V to 0.8V
Noise @ 1MHz offset=2.5nV/Sqrt(Hz), IDD=12mA...
782
0.0
Low-Power Bandgap Reference - Low Integrated Noise (62.5µVrms) in TSMC 40nm
This macro-cell is a low power voltage reference generator core designed for TSMC 40nm CRN40LP CMOS technology. The core is ideal as a general purpose...
783
0.0
Low-power Power-On-reset design in Samsung Foundries 65nm LFR6LP process
The POR-[1.8-5.5]-[0.9-1.4].01 is a Power-On-Reset designed in Samsung Foundries 65nm LFR6LP process nodes. It is used to monitor AVD and VDD supplie...
784
0.0
Low-quiescent DC/DC converter in TSMC 22ULL
Low-quiescent DC/DC converter in TSMC 22ULL 2.5 V process with high efficiency at light load....
785
0.0
Low-quiescent LDO voltage regulator in TSMC 22ULL 1.8V
Low-quiescent LDO voltage regulator in TSMC 22ULL 1.8V...
786
0.0
Power controller - MAESTRO
Maestro is a unique Power Controller RTL IP that features breakthrough capabilities compared to traditional HW or SW PMU design methodologies. It comb...
787
0.0
Power Management Unit
PMU IP includes following components: Bandgap reference voltage source, reference current sources and reference frequency generator. Bandgap source fo...
788
0.0
Power Management Unit
PMU is designed to supply integrated circuits with stable and precise voltage. 055UMC_PMU_01 is a library including RS block and 4 LDOs: LDO1 to suppl...
789
0.0
Power Management Unit
PMU IP includes following components: Bandgap reference voltage source and reference current sources. Bandgap source forms temperature, power supply a...
790
0.0
Power Management Unit
250iHP_PMU_05 is power management system, which consists of two parts – Bandgap and 4 LDOs. Bandgap reference voltage source forms temperature and pow...
791
0.0
Power Management Unit
250iHP_PMU_03 is power management system, which divided in primary unit and up to three secondary units. Primary unit includes bandgap reference volta...
792
0.0
Power management unit
PMU is designed to supply embedded integrated circuits with stable and precise voltage and 1%-accurate clock frequency. It integrates 4 LDOs and 3 osc...
793
0.0
Power management unit (0.9V, 1.8V, 3.3V output voltages, 1.2V reference voltage and 10uA/1uA reference currents)
028TSMC_LDO_01 is a Power management unit, designed to supply integrated circuits with stable and precise voltage. IP includes Bandgap block, and 3 LD...
794
0.0
Power Management Unit (1.1 - 1.4V output voltage, load current 5 mA)
055TSMC_PMU_01 is designed to form stabilized voltage with overcurrent indication (bit Status). The block has configurable output voltage (1.1/1.2/1.3...
795
0.0
Power management unit (1.2 V output voltage, 945 nA output current)
065TSMC_PMU_01 is designed to supply embedded integrated circuits with stable and precise internal voltage and currents. It integrates power switch el...
796
0.0
Power Management Unit (2.3 - 3.0V output voltage, load current 20mA)
130iHP_PMU_01 is designed to form stabilized voltage with overcurrent indication (bit OVC). The block has configurable output voltage (2.3 / 2.4 / 2.5...
797
0.0
Power on Reset
065TSMC_PoR_02 is a Power-on-Reset (PoR) circuit provides a reset signal to the chip when supply voltage reach required level. The block generates res...
798
0.0
POWER ON RESET FOR 1.8V SUPPLY
The power-on-reset(POR) generates a reset pulse to ensure that the core processing circuits are in a defined state when the power is ramping up or ram...
799
0.0
POWER ON RESET FOR 3.3V SUPPLY
The power-on-reset(POR) generates a reset pulse to ensure that the core processing circuits are in a defined state when the power is ramping up or ram...
800
0.0
POWER ON RESET FOR 5V SUPPLY
The power-on-reset(POR) generates a reset pulse to ensure that the core processing circuits are in a defined state when the power is ramping up or ram...